Hand-Cut Acrylic LED Signs

A pair of matching, low-profile signs for Guerrilla Development and Brett Schulz Architect.

The mockup I made over a snapshot as we settled on placement and design.

I assembled patterns printed across several pages and attached them to acrylic sheets with spray adhesive.

Then I used a scroll saw and a spiral cut blade to remove most of the material inside the letterforms.

Next was a lot of filing, scraping, sanding and refining.

 

The raw saw cut.
After filing square.

Plans called for mounting the controllers and power supplies on the wall beneath the signs. I made a small case to contain them.